Ego.

Home Datacenter: The Network

As i renovate the house i bought with my wife, i took profit to pull ethernet Cat. 7 cable on every room …

Right now, i have:

  • 2 * 4 plugs on the living room.
  • 2 plugs per bedroom
  • 1 in the entrance
  • 1 in the workshop under the house

Every ethernet line come to the technical closet where is also located the electrical board.

To connect all that line, i ordered:

  • An old HP Pro Curve 4910 (gigabit, manageable) for about 40€ on eBay.
  • A 24 ports patch panel on Amazon (~50€)
  • A 4U, wall-mount, rack, still on Amazon (~50€)
  • A 19″ power bar, again on Amazon (~25€)

Here is an overview of the assembled elements:


And here is the final setup, running on the closet:

For the curious, the small device on top of the switch is a RIPE Atlas Probe basically, a Arm SBC.

Next steps are:

  • Partition the network in VLANs:
    • One VLAN for the end user device (computer, phones).
    • One VLAN for “smart” objets (TV, Playstation, IPTV receiver, …)
    • One VLAN for the hosted services (this topic will be covered later ;-))
    • One VLAN for the DMS.
  • Replace my FAI router with a home made one. My choice fell to FriendlyElec Nano PI R2S : a powerfull ARM board with 2 Gigabit ethernet ports (one native, one using USB3).
  • Get a home made small NAS. One more time, i choose a FriendlyElec board: the Nano PI M4B … but this topic will have its dedicated article!

Thanks to this small, economic (at least, at buy time … i must keep an eye on power consumption of the HP Pro Curve), i can now use my home connection at its full speed:


Compared to Wifi, it’s unbeatable …

Next Post

Previous Post

2 Comments

  1. Twicsy 07/01/2022

    Hi there just wanted to give you a quick heads up and let you
    know a few of the images aren’t loading correctly. I’m not sure why but I think its a linking issue.
    I’ve tried it in two different web browsers and both show the same outcome.

    • G. 07/27/2022 — Post Author

      Hello !
      Thanks a lot. You’re right, several images on post “Des nouvelles de Oumpa Oumpa le Cam’ !” were broken.
      I fixed the issue !
      I took a quick look to others posts, but i didn’t saw any other image missing.

      Thanks again, Gérald.

Répondre à G. Annuler la réponse

© 2022 Ego.

Theme by Anders Norén